And a closeup of the newest one with different fabric front and back (and folded the opposite direction - just make sure the set you make is all folded the same way) Also this one is folded a little looser with the edges not completely matching.
Unfolded.
Let's make the pattern!
You will need:
16" Pizza pan or a 16" Plate
Ruler
Scissors
Pen or Sharpie Marker
Freezer Paper
Here is a list of the dimensions:
16" or a little less, across
10" deep
Tree Trunk -
2 1/4" at the top
2" at the bottom
1 1/4" long
Use the pizza pan to make the round portion of the pattern on the freezer paper. Love freezer paper patterns! If I had made the pattern 8" high, it would be exactly 16" wide, but since I wanted a larger napkin at 10" wide (finished 9 1/2"), it was slightly less. Three inches from the straight edge on one side, make the tree trunk (mine is 2 1/4" at the top, 2" at the bottom, and 1 1/4" long - you can make the trunk a custom size if you like). Then cut the pattern from the paper and mark the portion to leave open when you turn the napkin. I made mine 2 1/2" from edge at the same side as the tree trunk, about 2 1/2" long. I made several copies of the pattern to iron on the fabric, to make sure that the layout would be correct before cutting. No pins are required when you use the freezer paper and iron to the fabric. And the good news is you can use the pattern over and over!Press the patterns to the fabric then cut them out.
Now sew around each using a quarter inch seam allowance leaving an opening to turn.
Notice how the seams are sewn at the corners - completely across to the edge. Clip at the top of the tree trunks as shown above.
Press seams to the darkest fabric pressing the corners as shown below.
For crisp corners fold as above and turn. Press again right side out.