The idea for this quilt started several years ago while I was on a Christmas tour of houses in our local area. The thing is...I told someone from my garden club about what I wanted to make. And if you tell someone, then you need to do it! I described a red and white quilt with red embroidered cardinals. Ta da, that is what happened! Not that I didn't consider other embroidery motifs before I made it. There is the cutest little reindeer embroidery pattern from Ann the Gran called "Rudolph Reindeer" and so many snowflake patterns, too. But in the end the "Winter Cardinal" won out. This way it is a winter quilt rather than just a Christmas quilt.
I found the directions for this easy quilt in a Gooseberry Patch Christmas book I checked out from our very tiny local library. The next challenge was to choose the fabric. I needed to pick six fabrics (half a yard each) the ones making the final cut where: two plain fabrics, red and white; two dotted fabrics, white with white dots and red with white dots; red and white stripes; and a small gingham check in red and white...plus the white polar fleece for the back (about 2 and a half yards). Finding reds that did not clash and whites that didn't look pink next to the red took awhile. There were several fabrics that just did not work as well as I had hoped, for instance the zigzag fabric shown above and a large gingham check not shown. I was exhausted and hadn't even started to sew! Made several 7" square templates from my favorite freezer paper and cut out a total of eighty squares. I ended up using only 54 squares (six per row - 9 rows total) which made a perfect cuddle on the couch size.
The cardinals took awhile to embroider, some are complete in the picture above. And as you can see I had a lot of help for the layout.
So much help that I ended up laying it out on the dining room table. Time to sew the blocks into rows, then the rows together using a 1/4 inch seam allowance. Finished squares are 6 inches. Sewing the squares together went much more smoothly than I originally anticipated! The block corners met where they were supposed to. Imagine!
I researched several quilting websites before this step. Time to make the quilt "sandwich" with the top, batting and the polar fleece backing. I used sew-able basting spray "Spray n Bond" between layers which I've used many times to hoop fabric for embroidery and had on hand. Then large safety pins to hold the layers in place.
Taking my time and using my walking foot for first time since I started sewing many years ago, I carefully stitched 5/8 inch stitch line from the seam on all sides of the blocks. I loosened the tension on the sewing machine and used a large stitch. Love the way it looks! Trimmed the batting to an inch and a half all the way around. Then pulled and pinned the polar fleece evenly around the quilt, mitering the corners and stitched in place. Fini.
Tilly loves it, too!
Let's make a pillow and pillow cover, this one for Fall. Don't you just love those colorful silk leaves? I found some two years ago at the dollar store and bought two packages (50 leaves per package). I've used them to decorate - sticking them in wreaths and such. Time to try something different. Introducing the Falling Leaves Pillow.
First I decided on the size pillow I wanted - mine was finished size twenty by ten. Eleven inches by twenty-one inches, including half inch seam allowance, using my handy dandy pattern made from freezer paper. I love this stuff. Make the pattern, put the plastic side down on your material, iron it with your iron set to the temperature appropriate for the fabric. No pins needed, you just cut around the pattern then pull it off.
And you can use the pattern again and again! How neat is that? For the pillow form cut two front pieces from neutral fabric, I used an old sheet. Sew around the edges using a half inch seam except for a four inch opening. Stuff it with fiberfill or the inside of an old pillow and then sew it shut. No one but you will see this so don't worry about stains or finishing the edge.
Now cut the front and two backs (11 inches by 12 inches) out of the fabric you have chosen for the pillow cover. How did I decide how to place the silk leaves? I threw them on the floor! (smile)
Then used a section of that for placement on the front fabric piece. Using basting spray I placed the leaves how I wanted or you can just pin them in place before sewing.
Using my sewing machine, I zig-zaged around each. You could also sew around each leaf using a straight stitch.
Hem one side of each of the two back pieces along the short edge of the fabric. Press the edge a scant quarter of an inch, fold it over again, press again and then stitch.
Finish the cover using french seams. Put wrong sides together and pin for the first seam. From the picture below you can see how the back pieces come together with the hem in the middle of the cover.
Stitch a small seam using your presser foot window (slot where the needle goes through the foot) as a guide. Stitch straight off the fabric with your stitches. At each corner you should have stitching that makes a little square.
For crisp corners fold as below and turn entire cover to the wrong side. Press seams and then stitch all the way around again a little wider than the existing seam.
Turn using the crisp corner technique.
You are done! I added a little hand embroidery for the stems. By the way the pillow shown below has been washed in cold water twice, the first time by hand and the second in the machine on delicate cycle. I have a dog and the pillow cover is off white...need I say more?
More pillow covers and ideas to come!
Tilly loves it, too!
